These cables are widely used European power cables used for electricity supply for fixed installations with a voltage rating of 600/1000V in public buildings. Their flame-retardant non-corrosive outersheath makes them suitable for use where smoke and corrosive gases would pose a risk to life and sensitive equipment in the event of a fire.
These cables are suitable for use in dry and damp environments, on or under plaster, on cable trays, in walls, masonry and in concrete. The N2XH cable is not suitable for direct burial without external protection against mechanical stress or water.
Unarmoured power and control cable is most suited for energy supply in fixed installations. NYY Cable can be installed indoors where there is little chance of mechanical damage. It can be installed in open air, underground, in water and also in brickwork and concrete with the exception of shaken, vibrated or compressed concrete. The NYY cable features solid plain copper conductors, PVC insulation, PVC filler and a black PVC outer sheath.
Plain annealed copper conductor (1.5mm to 6.0mm class1 solid 10mm to 300mm class 2 stranded) XLPE insulated, LSZH sheathed. Black 600/1000 volt grade to BS-EN 60332-3-24(C) and VDE0276 for fixed indoor installation - not suitable for direct burial.Full Product Specification
Cable Specification: NYY-J Mains and Control Cable Non Armoured manufactured to standard IEC60502-1 and VDE 0276-603 and available in sizes 5mm to 16mm and in 2, 3, 4, 5 and 7 cores. The cable features solid plain copper conductors, PVC insulated, PVC filler, PVC outer sheath. Black. 600/1000 volts grade to IEC60502-1 and VDE 0276-603. For installation indoors and outdoors as underground, or in cable ducts, installations with additional protection where mechanical damage is unexpected.Full Product Specification