Cable Specification: BS7211 Cables - Fixed Wiring Cable - 6491Y, 6181B, 6491B, Twin and Earth - LSZH Cable - Fixed Wiring Cables are generally used for power distribution, indoor and outdoor installations and certain ranges have added impact protection due to their steel wired armouring or aluminium wired armouring. Fixed wire cable is suitable for installation in damp conditions.
The 6491B low smoke halogen free cable is most suited for use in conduit and for fixed protection installation. They can be used in lighting installations, switch and control gear and also in appliances. These fittings require a higher temperature threshold from cables which the 6491B is suitable for. The low smoke zero halogen outer sheath is ideal in applications where fire, smoke, emissions and toxic fumes would create a potential threat. The cable features a stranded plain annealed compacted circular copper conductor and a LSZH outer sheath. The cable is available in brown, black, grey, blue, green/yellow, white, orange, turquoise, violet or Pink.Full Product Specification
6181B Surface Wiring Cables are primarily used in domestic and commercial buildings. They can be installed in conduit or trunking and can be surface mounted when used for earthing. Due to the low smoke zero halogen sheath, the 6181B cable is suitable for use in areas where there may be potential risk should there be a fire or fume emissions. The 6181B cable consists of a plain annealed stranded circular copper conductor, XLPE insulation, and a brown/white or grey/white LSZH sheath.Full Product Specification
The 624*B low Smoke and zero halogen cables are ideally used where smoke and toxic emissions could pose a hazard in the event of a fire. The cable can be installed in dry or damp premises clipped to the surface, in tray or in air where mechanical damage would not be an issue. The cables can also be installed in trunking or ducting where mechanical protection is required. The cable consists of a plain annealed compacted copper conductor, XLPE insulation, 1, 2 or 3 cores laid flat with an uninsulated circuit protective conductor and white LSZH sheath.Full Product Specification
Plain annealed class 1 solid conductor, LSZH insulated, LSZH sheathed. Grey. 300/500 volt rated to BS EN60332-3-24, VDE0250-214. Suitable for industrial or domestic applications and designed for dry, moist or wet open areas ie under plaster and in concrete - not suitable for exposure to direct sunlight.Full Product Specification
Plain annealed copper conductor (1.5mm to 6.0mm class1 solid 10mm to 300mm class 2 stranded) XLPE insulated, LSZH sheathed. Black 600/1000 volt grade to BS-EN 60332-3-24(C) and VDE0276 for fixed indoor installation - not suitable for direct burial.Full Product Specification