Electric Vehicle Charging & CAT5 Cable SWA

Overview

This cable is for use in the installation of electric vehicle charge points. This is a combined armoured 3 core power and 4 pair CAT5 Data cable in a double sheathed design for extra protection.

Whilst designed for use in electric vehicle chargepoints, the cable is suitable for other installations where power and CAT5 Data cable is required.

Standards

IEC 60228

IEC 60502-1

IEC 60332-1-2

Construction

Power Cable
Conductor: Class 5 Flexible Stranded Copper
Insulation: XLPE (Cross Link Polyethelene)
Bedding: Extruded PVC Compound
Armour: Steel Wire Armour (SWA)
Sheath: PVC (Poly Vinyl Chloride)

Cat5 Cable
Conductor: Class 1 Solid Copper
Insulation: PVC (Poly Vinyl Chloride)
CAT5 Sheath: PVC (Poly Vinyl Chloride)

Characteristics

Voltage Rating: 600 - 1000 Volts
Test Voltage: 4kV
Temperature Limits: -30°C to +80°C
Minimum Bending Radius: As per cable manufacturer datasheet

Should not be installed at temperatures below 0°C