ENATS 09-6 Telecommunications Cable - SCR, SWA - 0.63mm

Overview

ENATS 90-6 Telecommunication cable is a PVC insulated, multipair, light current control cable which is intended to be used for feeder protection in control, alarm equipment and switchgear. The cable can also be used in power stations where the voltage does not exceed 150V d.c or 110V a.c. The cable can be installed where there is risk of mechanical impact due to the steel wired armouring.

Standards

• ENATS 09-6 Issue 8 Section 5 3.6
• BS4066 Part 1
• IEC 332 Part 1

Construction

Conductor: Solid tinned annealed copper conductors twisted to form pairs
Insulation: PVC insulated
Screen: Aluminium / mylar foil tape complete with 0.5mm² drain wire
Bedding: PVC bedding
Armouring: Galvanised steel wire armour
Sheath: PVC sheath
Sheath Colour: Black

Characteristics

Temperature limits: -20°C to +70°C
Minimum Bending Radius: As per manufacturer datasheet
Core Identification: Please refer to associated colour code chart in PDF datasheet

Should not be installed at temperatures below 0°C

For more information please consult a member of the Cleveland Cable Sales Team