ConnectEV Electric Vehicle Charging & CAT5e Cable

This cable is for use in the installation of electric vehicle charge points. This is a combined 3 core power and 4 pair CAT5e Data cable with an aluminium tape screen and drain wire.

Whilst designed for use in electric vehicle chargepoints, the cable is suitable for other installations where power and CAT5e data cable is required.

Standards

• IEC 60228
• IEC 60502-1
• IEC 60332-1-2

Construction

POWER CABLE 

Conductor: Class 5 Flexible Stranded Copper
Insulation: XLPE (Cross Link Polyethelene)
Screen: PET Tape wrapping
Sheath: PVC (Poly Vinyl Chloride)

CAT5 CABLE

Conductor: Class 1 solid copper
Insulation: PVC (Poly Vinyl Chloride)
Screen: Drain Wire with Aluminium Foil Tape
CAT5 Sheath: LSZH (Low Smoke Zero Halogen)

Characteristics

Voltage Rating: 600 - 1000 Volts
Test Voltage: 4kV
Temperature Limits: -30°C to +80°C
Minimum Bending Radius: As per cable manufacturer datasheet

Should not be installed at temperatures below 0°C