CY Control Cable - Flexible - BS EN 50525-2-11 and VDE 0250

Description

CY Control Flexible cable is used in similar areas as YY flexible cable (such as assembly and production lines) where there is a requirement to avoid high frequency interference.

These cables are not UV resistant but can be used outdoors if adequately protected against direct sunlight in trunking etc.

Key Features
  • Installation Guidelines
    Installation Guidelines Should not be installed at temperatures below -5°C
  • Voltage Rating
    Voltage Rating 300/500 Volts
Construction
  • Conductor: Plain Annealed Flexible Copper Conductors
  • Insulation: Polyvinyl Chloride (PVC)
  • Bedding: Tinned Copper Wire Braid
  • Screen: Tinned Copper Wire Braiding
  • Sheath: PVC (Polyvinyl Chloride)
  • Sheath Colour: Grey
Standards
  • Generally to BS EN 50525-2-11, VDE 0250, CY, SY and YY Cables are thoroughly tested under BSI kitemark KM712695 in our accredited lab prior to delivery, The lab is audited by BSI as an independent 3rd party to verify that the testing procedures and the cable meet the standards and are fit for purpose

Core Colours

2 core - Black with White numbers
3 core and above - Black with White numbers plus Green Yellow

Also available with coloured cores as follows:

2 core - Blue Brown
3 core - Blue Brown Green Yellow
4 core - Brown Black Grey Green Yellow
5 core - Blue Brown Black Grey Green Yellow