ENATS 09-6 Telecommunications Cable - PE, SWA, PVC - 0.50mm
Description
ENATS 09-6 Telecommunication cable is a polythene insulated, multipair, light current control cable which is intended to be used for feeder protection in control, alarm equipment and switchgear. The cable can also be used in power stations where the voltage does not exceed 150V d.c or 110V a.c. The cable can be installed where there is risk of mechanical impact due to the steel wired armouring.
Key Features
-
Installation Guidelines Should not be installed at temperatures below 0°C or above +40°C -
Minimum Bending Radius As Per Manufacturers Datasheet -
Temperature Limits Ambient Temperature -20°C to +70°C
Construction
-
Conductor: Solid Plain Annealed Copper Conductors
-
Insulation: Polyethylene insulated
-
Bedding: Polyethylene (PET)
-
Sheath: PVC (Polyvinyl Chloride)
-
Armour: Galvanised Steel Wire Armour (SWA)
-
Sheath Colour: Black
Standards
-
ENATS 09-6 issue 8 table E2A/E2.B section 2 - induced voltage between the pairs up to 15kV
Core Colours
7 Pair: Red Yellow Black Violet Orange Grey Green Brown Orange Blue Green Brown Orange White
19 Pair: Black Violet Red Yellow Green Brown Red Yellow Green Brown Red Yellow Green Brown Red Yellow
as 7 Pair - Plus Green Brown Red Yellow Green Brown Blue White
37 Pair: Black Violet Red Yellow Green Brown Red Yellow Green Brown Red Yellow Green Brown Red Yellow
as 19 Pair - Plus Green Brown Red Yellow Green Brown Red Yellow Green Brown Red Yellow Green Brown Red Yellow Green Brown Blue White