ENATS 09-6 Telecommunications Cable - SCR, SWA, LSZH - 0.50mm

Description

Telecommunication cable, available in 0.5mm and 2, 5, 10 or 20 pairs and manufactured to ENATS 09-6. The cable features solid plain annealed copper conductors, polyethylene insulated, twisted to form pairs, collective aluminium/mylar foil tape screen complete with 0.5mm2 drain, wire, low smoke zero halogen (LSZH) bedding, galvanised steel wire armour, low smoke and zero halogen (LSZH) sheath. Black. Generally to ENATS 09-6: Issue 6 Section 4.5.

The primary use of this telecommunication cable is with control indication and alarm equipment for switchgear. They are suitable for installing in circuits where the minimal voltage does not exceed ISOV DC or 110VaC.

Key Features

• 
  Installation Guidelines Recommended for installation at temperatures between 0°C and  +40°C
• 
  Minimum Bending Radius As Per Manufacturers Datasheet
• 
  Flame Retardancy BS4066 PT1 & IEC 332 PT1
• 
  Temperature Limits Fixed -30°C to +70°C

Construction

• Conductor: Solid Plain Annealed Copper Conductors
• Insulation: Low Smoke Zero Halogen (LSZH)
• Bedding: LSZH (Low smoke Zero Halogen)
• Sheath: Low smoke Zero Halogen (LSZH) to BS 7655
• Armour: Galvanised Steel Wire Armour (SWA)

Standards

• ENATS 09-6: Issue 8 Section 4.5, Flame propagation to:IEC BS4066 PT1IEC 332 PT1

Core Colours