Hawke Cable Glands

Description

Overview

Hawke 501/453/UNIV Group II Cable Glands suitable for outdoor or indoor for use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables.

501/453/UNIV Glands are for particular use with cables that exhibit ‘Cold Flow’ characteristics.

Overview of the gland:

• Flameproof, Increased safety, Dust Protection & Restricted Breathing
• Class / Zones / Divisions
• Certified ATEX / IECEx / c CSA us
• Provides armour clamping using one clamping arrangement for all armour / braid types.
• Provides a diaphragm seal on inner sheath of cable which will not damage cables that exhibit ‘Cold Flow’ characteristics.
• Provides an outer deluge seal to prevent moisture ingress to the cable armour / braid.
• Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.
• Manufactured in brass

OS gland specification:

• Entry thread metric – M20²
• Entry thread NPT – ½"
• Inner sheath – Min 3.5 / Max 8.1mm
• Outer sheath – Min 5.5 / Max 12.0mm
• Armour / Braid – Orientation 1 0.8 / 1.25 – Orientation 2 0.0 / 0.8