BS6708 Type 7 Mining Cable - EPR, CP - 16mm to 150mm

Description
Overview
Cleveland Cable Company can supply a range of mine and quarry cable. Type 7 mining cable is generally used in deep mines where explosive gasses and dust can accumulate and on surface for supplying excavating, crushing machines and equipment.
Key Features
-
Installation Guidelines Should not be installed at temperatures below 5°C or above 60°C
-
Voltage Rating 640V To 1100V
-
Minimum Bending Radius As Per Manufacturers Datasheet
Construction
-
Conductor: Electrolytic stranded tinned copper wire IEC 60228 Class 5
-
Insulation: Ethylene propylene rubber (EPR) Ground core is not insulated
-
Bedding: Rubber based bedding compound
-
Screen: Tinned copper / Nylon braided screen over phase cores. Pilot core is not screened.
-
Sheath: Heavy duty chloroprene outer sheath
-
Layup: All cores are laid up in contact with the bare copper earth conductor
-
Separator: Colored Textile tape for core identification.
Standards
-
BS 6708
Core Colours
Three phase cores with composite individual screens and one unscreened pilot core laid up in contact with each other and the bare earth conductor in the centre.