Light Duty V75 PVC Flexible Cord 250/250V Cable - 0.50mm² to 0.75mm²

Enquire Now

Description

Light Duty V75 PVC Flexible Cords are designed as electrical supply cables for a wide range of domestic and commercial light appliances to 250V including radios, shavers, desk lamps, and small office machinery under Australian and New Zealand Standards. This cable features plain annealed flexible stranded copper conductors, insulated and jacketed with a Polyvinyl Chloride (PVC) compound specifically formulated to handle continuous operating temperatures up to 75°C. Manufactured in both flat and round configurations, the range fully complies with the structural requirements of AS/NZS 3191 and AS/NZS 1125 standards, making them an ideal choice for double-insulated appliances or equipment requiring a dependable earth connection.

These cables are suitable for installation in internal, dry environments only where there is no risk of moisture or atmospheric exposure. Due to their light-duty construction, they offer minimal resistance against physical damage and are not advised for outdoor use or demanding commercial areas. The flexible PVC outer sheath is intended purely for low-stress setups and must not be installed where it will encounter mechanical strain, severe abrasion, crushing forces, or direct impact.

For safe installation, the cable must be handled carefully to prevent tight kinks, maintaining a minimum bending radius of six times the overall cable diameter during flexing. Installers should always use appropriate protective bushings or cord grip fittings when feeding the cable through enclosures or equipment chassis to eliminate any potential for structural chafing. As these are designated as flexible cords, standard electrical safety regulations require that they only be used to connect temporary or portable equipment and must never be utilized as a permanent substitute for the fixed wiring within a building structure.

Key Features