Standard Fire Alarm & Security Cable BS5839, BS7629 1mm - 4mm

Description
FIRE RATING 30 MINUTES
Standard fire alarm and security cable. Soft Skin Standard Fire Resistant Cables for general use in fire detection, fire alarm, voice alarm, and emergency lighting circuits. These cables are designed to carry on working for a specific length of time under fire conditions.
‘Standard’ fire resistance is recommended for general use in low rise buildings up to 10 storeys.
Key Features
-
Installation Guidelines Should not be installed at temperatures below 0°C or above +40°C
-
Voltage Rating 300/500 Volts
-
Minimum Bending Radius As Per Manufacturers Datasheet
Construction
-
Conductor: 1.5mm2 - 2.5mm2 Class 1 solid conductor according to BS EN 60228 4mm2, Class 2 stranded conductor according to BS EN 60228
-
Insulation: Fire resistant MICA tape or fire resistant silicone rubber
-
Protective Conductor: Tinned copper
-
Overall Tape Screen: AL/PET (Aluminium/Polyester Tape)
-
Circuit Protective Conductor: Tinned Copper
-
Sheath: Low smoke Zero Halogen (LSZH) to BS 7655
-
Outer Sheath: Low Smoke Zero Halogen (LSZH)
Standards
-
Fire Resistant to IEC 331, BS6387 & BS7629-1-2008, Flame Retardant to BS5839-1:2017, IEC60332-3 CAT CWZ & BS7629-1-1997, Acid Gas emission to BS EN 50267, IEC 60754, Flame propagation to BS EN 50265, BS EN 50266 & IEC 60360134, Smoke Emission to BS EN 50268, IEC 61034, Flame Propagation to BS EN 50265, BS EN 50266, IEC 60332
Core Colours
Outer sheath comes in a choice of: Red White Orange Black
E = Bare Earth conductor