BS5467 Mains Cable SWA, PVC, 1kV 25mm - 400mm

BS5467 Mains Cable SWA, PVC, 1kV 25mm - 400mm

Description

Multi-core PVC cable with steel wire armour (SWA). Power and auxiliary control cables for use in power networks, underground, outdoor and indoor applications and within cable ducting.

Key Features
  • Installation Guidelines
    Installation Guidelines Should not be installed at temperatures below 0°C or above +60°C
  • Voltage Rating
    Voltage Rating 600/1000 Volts
  • Minimum Bending Radius
    Minimum Bending Radius As Per Manufacturers Datasheet
  • Flame Retardancy
    Flame Retardancy BS EN/IEC 60332-1-2
  • Temperature Limits
    Temperature Limits Ambient Temperature, Fixed -20°C to +90°C
Construction
  • Conductor: Class 2 stranded copper conductor acc BS EN 60228 (previously BS 6360)
  • Insulation: Cross Linked polyethylene (XLPE)
  • Bedding: Polyvinyl Chloride (PVC)
  • Sheath: PVC (Polyvinyl Chloride)
  • Armour: Steel Wire Armour (SWA)
  • Sheath Colour: Black
Standards
  • BS 5467, Flame propagation: BS EN 60332-1, BASEC Approved (* refer to core colour section)
  • BS EN 50265, Category C;
  • BS EN 50266
  • Smoke emission to BS EN 50268 (IEC 61034)
  • Acid gas emission to BS EN 50267 (IEC 60754-1)

Core Colours

2 core - BrownBlue
3 core - Brown Black Grey also stocked with: 3 core - Brown Blue Green Yellow
4 core - Brown Black Grey Blue
5 core - Black Grey Blue Green Yellow

The following cables are made to IEC 60502-1 and not covered by BASEC: 5 Core 95mm, 5 Core 120mm, 5 Core 150mm, 5 Core 185mm, 5 Core 240mm