ENATS 09-6 Telecommunications Cable - SWA - 0.64mm
Description
ENATS 09-6 Telecommunication cable is a PVC insulated, multipair, light current control cable which is intended to be used for feeder protection in control, alarm equipment and switchgear. The cable can also be used in power stations where the voltage does not exceed 150V d.c or 110V a.c. The cable can be installed where there is risk of mechanical impact due to the steel wired armouring.
Key Features
-
Installation Guidelines Should not be installed at temperatures below 0°C -
Minimum Bending Radius As Per Manufacturers Datasheet -
Flame Retardancy BS4066 PT1 & IEC 332 PT1
Construction
-
Conductor: Solid tinned annealed copper conductors twisted to form pairs
-
Insulation: Polyvinyl Chloride (PVC)
-
Bedding: Polyvinyl Chloride (PVC)
-
Screen: Aluminium / mylar foil tape complete with 0.5mm drain wire
-
Sheath: PVC (Polyvinyl Chloride)
-
Armour: Galvanised Steel Wire Armour (SWA)
-
Sheath Colour: Black
Standards
-
ENATS 09-6 Issue 8 Section 5 3.6, BS4066 Part 1, IEC 332 Part 1