BS6708 Type 321 Mining Cable - EPR, SWA, CP -35mm to 120mm

BS6708 Type 321 Mining Cable - EPR, SWA, CP -35mm to 120mm

Description

Cleveland Cable Company can supply a range of mine and quarry cable. Type 321 mining cable is generally used in deep mines where explosive gasses and dust can accumulate and on surface for supplying excavating, crushing machines and equipment. Can be used as a trailing cable in quarries.

Key Features
  • Installation Guidelines
    Installation Guidelines Should not be installed at temperatures below 5°C or above 60°C
  • Voltage Rating
    Voltage Rating 1900/3300 Volts
  • Minimum Bending Radius
    Minimum Bending Radius As Per Manufacturers Datasheet
Construction
  • Conductor: Electrolytic stranded tinned copper wire IEC 60228 Class 5
  • Insulation: EPR (Ethylene Propylene Rubber)
  • Bedding: Rubber based bedding compound
  • Screen: Tinned copper / Nylon braided screen over phase cores. Ground core is not screened.
  • Sheath: Heavy duty chloroprene outer sheath
  • Layup: All cores are laid up in contact with each other.
  • Armour: Galvanised steel pliable armour
Standards
  • BS 6708

Core Colours

Three phase cores and one earth core, all unscreened, laid up around an elastomeric cradle without contacting each other.